Whenever you find yourself doing metal fabrication you’ll come to a time when you need to make a razor straight cut. Unfortunately most of us don’t have a big ‘ol “stomp shear”, so we need to use a power or hand tool. It seems no matter how many times I measured, set my tools up, got comfortable, did practice runs, etc. I could never get a perfectly straight line when cutting longer cuts on sheet metal. Recently it clicked in my head to utilize an old trick when making straight cuts with a plasma cutter.
Tag: shears
Wiring and Fabricating a Fuse Box Mount
One of the biggest hurdles of converting Project Pile House from “garage art” to an actual running, driving vehicle is putting some wiring into the vehicle. I’m running a carbureted small block Cheverolet V8 (SBC) so there is little to make the truck run and move under its own power, but some wiring is needed to make it street legal.
We have a Brake Pedal and The Firewall Becomes Three Dimensional
In the last update I was working on cutting out metal to make the firewall and mocking up my new brake pedal setup from Speedway. Since then I’ve been pretty busy making something from nothing. I had to initially tackle how I was going to mount the brake booster and […]
Forming The Firewall and Gathering Steering and Braking Parts
After getting the old swiss cheese firewall removed from the truck I started making the new firewall for Project Pile House. I started by having one of our tech advisors Sean help me make a cardboard pattern. Once the pattern was made we scribed out the shape onto our metal […]
Patching Fender Rot
It seems like all we talk about when working on Project Pile House is the rust and body damage it has.. but again today we’re covering the repair of more rust that’s on the truck. This time it’s on the sides of the fenders where the cab mounts attach to […]