One of the next big projects planned for Project Pile House is performing a mild chop and smooth job on the cab and roof. We started the process in a previous post where we showed you How to Shave and Smooth Unneeded Holes in the bed and cab. Today we […]
Tag: s10
How to Make a Custom Running Board From Scratch- Project Pilehouse Edition
In one of our last posts we gave you some sneak peaks of the custom running board project we’ve been working on for Project Pilehouse. During the process we documented the full build and shared some of our secrets to help you build a similar project yourself for cheap. After […]
Video- Installing New ProForged Suspension and Custom Front Air Suspension
We know everyone loves videos as well as pictures, so to supplement Part 2 of our Front Suspension Project we decided to show you how we went about installing the new front Proforged suspension and steering parts, as well as the custom air ride suspension in this video. Although it […]
Rebuilding front Suspension with a custom twist Part 2
In the last entry we showed you how to disassemble the front suspension on the S10 chassis that sits under Project Pile House. Once we had it all apart we began fitting the front air suspension. Air bags will allow the truck to drop all the way to the ground […]
Bed Floor Restoration and Setting Rear Ride Height-Project Pile House
We have been lucky enough on the east coast to have a pretty mild winter. This meant that we could really get work done AND enjoy our customs/classics throughout the winter (now I know what you west coast folks enjoy!). This meant that there was a month where I didn’t […]
Mocking up the Bed on Pile House.
Now that we have the cab and front end sheet metal mounted and they are a “bolt-on” affair, it’s time to start tackling the job of making bed mounts, as well as stretching the bed to fit the chassis. I initially was going to shorten the chassis to match the […]
Somewhere to Lay the Cab
Now that we are back from SEMA, I’ve gotten a big kick in the butt to get some real progress done on Project Pile House. I saw a ton of cool rods out in Vegas, and it helped me gather some ideas and inspiration for this project. So this week […]