In one of our last posts we gave you some sneak peaks of the custom running board project we’ve been working on for Project Pilehouse. During the process we documented the full build and shared some of our secrets to help you build a similar project yourself for cheap. After […]
Tag: Pilot house
Customizing a Chevy Corvair Van Bumper to Fit Project PileHouse
PileHouse is starting to shape up and we can now envision what the truck will someday look like when it’s “done”. But I still felt that the front end needed “something more”. After staring at it over lunch one day, I decided that the truck needed a custom bumper to […]
Running Board Fabrication, A Front Bumper, and an Engine
In one of our last small updates we hinted at the running board project I had started on Project Pilehouse. Fast forward a little and we have just about completed the passenger side running board, complete with the outer skin we formed with the Eastwood Bead Roller, Electric Metal Cutting […]
Stretching the truck bed of PileHouse
When we last mentioned how we were lengthening the bed of PileHouse we had just cut the bed apart and braced it to fabricate the new panels. This was not an easy task, but it was made much easier after the project had spawned some new prototype products. Many of […]
Removing the S10 Drivetrain and Detailing the Chassis
With all of the S10 suspension and steering components up front replaced with new Proforged parts, we needed to make the rest of the chassis and suspension look as good as the parts we put on. We decided to remove the stock Chevy V6 drivetrain first. We got some help […]
Video- Installing New ProForged Suspension and Custom Front Air Suspension
We know everyone loves videos as well as pictures, so to supplement Part 2 of our Front Suspension Project we decided to show you how we went about installing the new front Proforged suspension and steering parts, as well as the custom air ride suspension in this video. Although it […]
Suspension Removal Video and Custom Running Board Build
While we haven’t been updating as much as we should, we’ve been busy! I figured I’d give a peek into what’s been going on with Pile House since our last official build update. We got a comprehensive series of videos coming together for the front suspension and chassis detailing. Check […]
Rebuilding front Suspension with a custom twist Part 2
In the last entry we showed you how to disassemble the front suspension on the S10 chassis that sits under Project Pile House. Once we had it all apart we began fitting the front air suspension. Air bags will allow the truck to drop all the way to the ground […]
Rebuilding the front suspension with a custom twist Part 1- Front air ride on a Chevy S10
After I got the custom rear air suspension built for Project Pile House, I could now move on to the front suspension. The rear was relatively easy since there was a ton of room under the bed, but the front isn’t so easy. After some research on mini truck websites […]