With the bed off the C-10 project for frame repair, Adam mounted it to a rotisserie to take advantage of easy access to the underside. This was the perfect opportunity for treating rust living below, including the bed supports. Because the bottom of the bed doesn’t see daylight, Adam chose […]
The Eastwood Internal Frame coating may sound like it can only be applied inside frames but rest assured, this product is perfect to use anywhere you cannot get any tools into to prep. Think of ribbing inside a hood, behind a dash, and […]
Our tech team answers a lot of technical calls and emails each day, and there are a lot of common questions asked and advice given. Many of them are about when and where to use our different coatings and paints. Rust products might be the most confusing as far as […]
Should I use the Rust Encapsulator as a sealer after treating rusted areas with Rust Dissolver? Can I, or should I just use a primer? – If you fully remove the rust down to clean bare metal with the Rust Dissolver, applying epoxy primer to the areas would be a good way to seal the metal. Rust Encapsulator can also be used in this case, but it should be used in any situation where all rust was not fully removed.
Rust is something we all must deal with at some point in our lives. Whether it’s maintaining your daily driver, restoring a classic, or just around the house, rust is a type of corrosion that never sleeps and is always attacking metal. Below are the common ways to prevent, remove and stop rust in its tracks.
