No matter how good you are at body work you will run into pin holes, sand scratches, and imperfections that pop up just before you begin laying primer on a project. There are many assumptions that are made that glazing putty isn’t important when preparing a car for paint. We decided to list our top uses for glazing putty when painting a car at home.
Tag: Bodywork
Where and when do I use Epoxy Primer on my project?
In the past self etching primer was the go-to coating to apply over bare metal on a car. Metal required little prep work to apply it, it flashes/drys quickly, and it came in 1K Aerosol cans for small jobs. In the past 5-10 years you’ve probably been hearing more people talk about Epoxy Primers and their use as opposed to self etching primer. We decided to give you some insight on where and when epoxy primer works best.
How to apply body filler- Fix, Fill, and repair body damage Correctly.
In this how-to session Kevin goes over the various Eastwood Contour polyester body fillers and surfacers, as well as other Eastwood products. He talks about which to use where, how much to use, how to apply it, how to shape and sand it, and how to get it ready for primer and paint.
How to Choose the Right Sanding Block
How to Choose the Right Sanding Block The sanding block gets its name because once upon a time it was just a block of wood with sandpaper stuck to it. The hard, flat block allowed you to sand to a much more uniform surface. Later, the heavy rubber style “alligator” […]
How to shave and metal finish your firewall with Empire Fabrication
Shaving or smoothing the bodywork on a custom car has been one of the most popular modifications since the beginning. Shaving door handles and trim or side marker holes are the most common things to shave on a project car, but close behind that is smoothing or shaving the firewall. Sean of Empire Fabrication has gotten REALLY good at shaving and smoothing cars. So much so that his finished projects require basically no body filler at all and can be primered and block sanded straight away. Sean recently took the time to snap some photos and give us the rundown on how he tackles a firewall shave project. The donor vehicle is a VW Eurovan that he has already drastically customized. So grab a drink, sit back, and watch how to do the job right with Empire Fabrication.
How to Paint Your Car- The Basic Steps and Methods Uncovered
Painting a car is one of the most misunderstood parts of our hobby. It can be a daunting process to sand off the paint on your car, but it’s one of those jobs that things must get worse to get better.
Custom Hood Modifications- Converting a Multi-Piece Hood to One Piece
One thing that I’ve planned to customize on Project Pile House from day one was the hood. The hood on the truck is a “butterfly” (as I call it) style hood and was a design that Dodge rolled over from 30’s and 40’s trucks. I have taken a 50’s custom type approach to this truck and that style hood wasn’t going to flow. I decided to disassemble the hood and convert it to a one-piece hood.
Early Summer Project Pile House Update.
With the floor pans made up I decided to move outwards and tackle the rust in the door openings. The truck door sill on the drivers side was rotted away and the front of the door opening/jamb was rotted pretty bad. In fact the lower portion was almost non existent.
Project Resolution- Paint Stripping and Final Teardown
We’ve been working on Project Resolution now for a few months and we’re finally at a point where we are ready to start going uphill making the car nice again. With the front end removed I was able to remove the inner fender “skirt” and assess the damage that was […]