For a lot people who make the jump to a CNC plasma cutter, one of their first projects is often a piece of decorative artwork like a sign. The risk is low, the reward is often high, and the learning curve is just steep enough to be a real lesson. […]
Video
We Answer Your Questions About Rust Encapsulator Plus
If there’s one Eastwood product that gets everyone asking questions, it’s our Rust Encapsulator Plus. To answer all the questions we usually hear, our video team put together a short Q&A vid that demonstrates how, when, and why of this signature product. Check out the video below and add to […]
Build a Custom Exhaust Using a Tubing Kit
You don’t have to have a shop full of tools to build a custom exhaust for your project. In this video, our product manager Cody walks you through the process of creating a system from scratch using a builder kit consisting of pre-bent, pre-flared tubing and aftermarket mufflers. Cody gets […]
Bagged C-10 – Episode 5: Rusty Frame Repair and Repaint
In this episode, Adam covers all the steps required to repair the cracks in 10-year-old frame notch kit as well as years of general rust damage. In the process, he repaints the entire frame behind the cab while the bed is still off. Watch the video to see how nice […]
How to Paint a Bumper Using Single Stage Paint
If you’ve ever wondered whether you can use single-stage paint to make a body repair, this video might help. Eastwood product manager Ryan shows how he repaints the rear bumper on his GTI using Eastwood’s single-stage OEM Select paint. Unlike base coat/clear coat paint systems, this single-stage paint incorporates the […]
Bagged C-10 – Episode 4: Making New Brake Lines From Scratch
While Adam had the bed off his C-10 for chassis refinishing, he decided to overhaul his old brake lines. The original equipment brake lines were rusting from the inside and showing signs of fatigue from past work. The original flares were leaking as well, and the heads of the fittings […]
Beginner’s Guide to TIG Welding Basics (Video)
Tungsten Inert Gas welding – aka, TIG welding – is at once an exceptionally useful skill to learn and a bit perplexing. The challenge of learning to TIG comes down to patience, a steady hard, and extraordinary eye-hand coordination. Many an experienced welder has fallen short when it comes to […]
Bagged C-10 – Episode 3: Fabricating a Custom Notch Cover
Adam’s 1985 Chevy C-10 pickup project continues with the addition of a custom cover for the notched frame. Until now, he’s been hiding notch job with some wooden boards. But he’s decided it’s time to get serious make a sheet metal panel in preparation for a new bed finish. In […]
Project Sunny – Episode 7: Rear Floor Structure Complete
Project Sunny returns with a new episode after a bit of a break for other projects. In this new episode, Bryan explains why he has reworked the floor panel support rails he’d previously made. The new pieces are a major improvement, as you’ll see. He also tackled the problem of […]