Ever wonder what it is that separates the mirror smooth bodies of show cars from the body filler fender bender repair you did in your driveway? Often times it all comes down to the important step between the first coat of primer and the first coat of paint, called blocking. Without proper blocking, no matter how good the painter is you are never going to get a perfect show car finish on your project.
DIY & How To
How to repair a damaged Aluminum Alloy Wheel
In this part of the country (Mid-Atlantic) cars, wheels especially take a beating during the winter. Slippery roads, corrosive salt on the roads, and potholes that could swallow a small child wreak havoc on your automobile. The cost to replace a damaged aluminum wheel can be VERY costly. In the classic car world wheels may be obsolete and impossible to replace if you have a damaged wheel. I decided to tackle repairing a badly damaged aluminum aftermarket wheel I have had stashed away for years.
How to make a Body Panel From Scratch- Rear Quarter Panel Fabrication
If you want to get better at anything you need to practice and push yourself to try things a little out of your skill/comfort level. Metal Shaping is 100% one of those things that you need to practice and work to get better at, even if it means wrecking a […]
How to Build Motorcycle Gas Tank Sides with Ron Covell
This year he showed how to make a motorcycle gas tank side with a voluptuous compound curved shape using some of the most basic metal shaping tools. In this demonstration he shows how to make the left side of the tank.
Solid Rivet FAQ
Solid rivets, sometimes called aircraft rivets, are a solid piece of metal with a large head on one side and a straight shaft. They are installed by sliding them in a hole slightly bigger than the shaft, then deforming the protruding shaft to 1 ½ times its size, so it is tight and cannot pull out. They differ from pop rivets in that they are solid, therefor stronger, and use a buck bar and pneumatic gun to install them instead.
Candy Coat Paint FAQ
What exactly is candy paint? Candy paint, or sometimes Kandy paint, is a clear paint with translucent pigments in it. It is typically applied over a metallic base coat and allows the metal flakes to be seen through the tinted candy color layer. One of the trickiest things about candy […]
Welding Helmet FAQ
An auto-darkening helmet allows you to see to position the electrode, or wire feed gun on your work without needing a hand to flip the helmet down before striking an arc. Many welders have perfected the art of flipping a fixed tint helmet down with just a quick nod of the head, but that still doesn’t work for all situations and welding positions. On top of that, since the tint is created electronically, it can be adjusted to better suit all lighting conditions and types of welding.
Rust Converter FAQ
What happens if you sand to bare steel and just use as insurance? – Rust Converter needs the rust to properly work and cure (think of it as the catalyst for the product). Rust Converter is intended for heavier rust. If applied over bare metal, it will not cure properly and can actually cause light flash rust.
Rust Converter vs. Rust Encapsulator
Let’s face it, we all have rust issues to deal with. Some projects are better than others, but it’s hard to find a project car or truck that has no rust at all, even if it comes out of the Arizona desert. Eastwood makes many products for dealing with different […]